Usually, the work part of the motor is rotated. This type of motor is called a rotor motor. It is also called a linear motor. Motors can provide a wide range of power, from milliwa...
1. The main performance of failure after long-term use Vibration is enhanced during use. The main reason for this phenomenon is that the internal components of the DC motor are too...
1 . The fan pulley is too loose or oily to slip; 2 . Each wire joint is loose or detached, and the wire sheath is broken and grounded to cause a short circuit; 3 . The commutator o...
1. Do not hammer the casing of the reducer by gravity to avoid damage. 2. Regularly check whether the installation foundation, seals, drive shafts, etc. are normal. 3. If used norm...
1. Determine the use of DC geared motors, application scenarios, and list environmental requirements before purchase. 2. First determine what kind of DC reducer is needed, such as ...
A. Use the worm for the first time or replace it, change the oil after 150-400 hours of operation, and the oil change interval will be less than or equal to 4000 hours. B. Regularl...