Summary:In view of several main factors affecting the service life of steel shell motors, corresponding countermeasures are prop...
In view of several main factors affecting the service life of steel shell motors, corresponding countermeasures are proposed, which are mainly reflected in the following aspects:
1. Strengthen inspection and monitoring
The steel shell motor consists of multiple components, so its life will not be affected by a single factor. It is especially necessary to prevent the machine from malfunctioning before it fails. Therefore, relevant personnel should strengthen the overall inspection and monitoring of steel shell motors. If the screws of the steel plate motor terminal board are loose or damaged, they will be repaired as soon as they are found, such as whether the bearing grease is sufficient, whether the bearing is heated or rusted, etc., and deal with them separately according to the situation to ensure that it is in normal working condition. Even if there is water in the working environment, the air conditioner, whether the parts are missing or rusted, it will have various unpredictable effects on the engine, which will affect the service life of the engine, and make inspection and monitoring work an important role in the entire work process. .
2. Repair and repair faults in time
As we all know, once the steel shell motor fails, other negative effects cannot be ignored. Common faults such as bearing wear, part deformation, and falling off, such as heating and burning of the steel shell motor, if not handled in time, will increase the damage and functional defects of the steel shell motor itself, and have the most direct impact on the service life of the steel shell motor. Therefore, in the event of a mechanical failure, the relevant personnel should perform maintenance in a timely manner to clarify the cause and location of the failure. And promptly disassemble, clean and repair related parts, try to restore the integrity of the steel shell motor and its use function, and try not to affect its service life.
3. Pay attention to maintenance and maintenance
Its important impact on the life maintenance is very "steel shell motor maintenance and use. Only the daily proper maintenance life can improve the control and use of the steel shell motor. The steel shell motor inspection is high-speed from, small, safe, continuous, such as medium The implementation of the interface and so on will cause this to catch up. The wear and tear will not be a hidden danger in the details of each requirement. It is inevitable that flexibility will require maintenance of various daily capabilities. We have a naked eye for the following suitable inspections. , Maintenance, etc. Whether the machine is rusty: whether it is necessary to start with the lack of falling off fans such as bearing parts for use, appearance, the environment, whether the steel shell motor is greased, whether the steel shell motor is different; whether the maintenance is different, and the maintenance runs in time The machine will be sounded next. And whether it is tested to check the degree of use, whether the current is fixed and the switch is normal, whether the temperature is bearing, whether the steel shell steel shell motor is aging, and whether the steel shell motor is in contact with tight wire tools and so on.